Msi X2-109 v1 Manual do Utilizador descarregar pdf (Página 43)

Configuring Arrays and Logical Drives 3-9

A graph shows the progress of the initialization until it is complete.

5. After the initialization is complete, press Esc to return to previous

menus.

If you press Esc while initialization is in progress, the following

options appear:

– Stop: (Available only if AutoResume is enabled on the adapter:

Management Menu→ Objects→ Adapter→ AutoResume.)

The initialization is stopped, and the CU stores the percentage

of the initialization already completed. If AutoResume is enabled,

and if Fast Init is not enabled, the initialization resumes where it

left off when you restart it, instead of starting over from 0 percent.

– Continue: The initialization continues normally.

– Abort: The initialization is completely aborted. If you restart

initialization, it begins at 0 percent.

(Second Initialization Method) Follow these steps to initialize a logical

drive using the Objects menu.

1. From the Management Menu, select Objects→ Logical Drive, as

shown in Figure 3.3.

A list of configured logical drives appears.

Figure 3.3 Logical Drive Submenu

2. Select a logical drive, if there is more than one configured, and press

Enter.

3. Select Initialize from the submenu and press Enter.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 131 132

Sem comentários

Msi X2-109 v1 Manual do Utilizador Página 43