MSI MS-7036 Manual de Instruções descarregar pdf (Página 49)

3-18

MS-7046 M-ATX Mainboard

PNP/PCI Configurations

This section describes configuring the PCI bus system and PnP (Plug & Play) feature.

PCI, or Peripheral Component Interconnect, is a system which allows I/O devices to

operate at speeds nearing the speed the CPU itself uses when communicating with

its special components. This section covers some very technical items and it is

strongly recommended that only experienced users should make any changes to the

default settings.

Init Display First

This setting specifies which VGA card is your primary graphics adapter. Setting

options are:

[PCI Ex] The system initializes the PCI Express graphic first. If a PCI Ex-

press graphic card is not available, it will initialize the PCI graphic

card.

[PCI Slot] The system initializes the PCI Graphic card first. If a PCI Graphic

card is not available, it will initialize the PCI Express graphic.

Clear ESCD

The ESCD (Extended System Configuration Data) NVRAM (Non-volatile Random Ac-

cess Memory) is where the BIOS stores resource information for both PNP and non-

PNP devices in a bit string format. When the item is set to [Enabled], the system will

reset ESCD NVRAM right after the system is booted up and then set the setting of the

item back to [Disabled] automatically. Setting options: [Enabled], [Disabled].

Assign IRQ For VGA

Set to [Enabled] allows BIOS to assign an IRQ to VGA card. Choose [Disabled] if you

want to release the IRQ. Setting options: [Enabled], [Disabled].

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55 56

Sem comentários

MSI MS-7036 Manual de Instruções Página 49