MSI MS-9105 Manual de Instruções descarregar pdf (Página 52)

Chapter 3

3-10

CPU L2 Cache ECC Checking

This allows you to enable or disable the ECC (Error-Correcting Code) feature

for error detection and correction when data passes through L2 cache

memory. Settings: Enabled and Disabled.

Processor Number Feature

This option is for Pentium

III processor only. When set to Enabled, this

will check the CPU Serial number. Disable this option if you don’t want the

system to know the serial number.

Quick Power On Self Test

The option speeds up Power On Self Test (POST) after you power on the

computer. When setting the item to Enabled, BIOS will shorten or skip

some check items during POST. Settings: Enabled and Disabled.

Raid & SCSI Boot Order

The field allows you to determine the boot priority of the attached SCSI card

and Promise IDE RAID device when First, Second or Third Boot Device is

set to SCSI. Settings: Raid, SCSI and SCSI, Raid.

First/Second/Third Boot Device

The items allow you to set the sequence of boot devices where BIOS

attempts to load the disk operating system. The settings are:

Floppy The system will boot from floppy drive.

LS120 The system will boot from LS-120 drive.

HDD-0 The system will boot from the first HDD.

SCSI The system will boot from the SCSI.

CDROM The system will boot from the CD-ROM.

HDD-1 The system will boot from the second HDD.

HDD-2 The system will boot from the third HDD.

HDD-3 The system will boot from the fourth HDD.

ZIP100/250 The system will boot from ATAPI ZIP drive.

LAN The system will boot from the Network drive.

Disabled Disable this sequence.

Boot Other Device

Setting the option to Enabled allows the system to try to boot from other

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 81 82

Sem comentários

MSI MS-9105 Manual de Instruções Página 52